ISIS Powder - Tutorials¶

Obtaining tutorial data¶

These tutorials will use the data found in the ISIS example data sets. The data sets can be downloaded from the Mantid download page, under Sample datasets - ISIS. Users may also use their own data instead however results will differ. Some additional configuration may also be required which is explained in later tutorials.

Copying instrument example files¶

Open your Mantid install location, by default this will be C:\MantidInstall on Windows and /opt/Mantid on Linux. Open scripts > Diffraction > isis_powder. In these tutorials we will be using Polaris examples and data however you may set-up a different instrument.

Open polaris_routines (or ‘instName’_routines), there will be a folder called Examples. Copy the contents (all files and folders) within the Examples folder to a known location.

Importing the instrument¶

Open up Mantid, then go to the scripting window by either pressing F3 or going to View - Script Window

First we need to import the instrument to be able to use it. If you are using a different instrument substitute Polaris for your instrument name:

# Note this IS case sensitive
from isis_powder import Polaris

A quick introduction to objects¶

This section is for script writers who are not familiar or comfortable with object orientation. If you feel comfortable with the concept of objects holding state you may skip onto the next section.

The ISIS Powder scripts use objects to hold a state, an object is best illustrated with the below example:

blue_duck = Duck(type="Blue")
red_duck = Duck(type="Rubber duck")

On lines 1 and 2 we create a new duck object. Each object has a name we choose (in this case blue_duck and red_duck) and a separate state, but the actions we can perform on each are the same. For example

blue_duck.feed()

We now have fed blue_duck so its state will have changed so it is no longer hungry. However the red_duck has not changed at all so its state is still hungry in this example.

Because objects have their own state you can create multiple objects in your script to perform different actions, such as processing half your data with one set of options and the other half of the data with another set of options.

Paths to the required files¶

Navigate back to the files copied from this section of the tutorial Copying instrument example files. There should be two files and a folder. If you are using the ISIS example data set (see Obtaining tutorial data) you will not need to modify anything at this point.

If you are not using the ISIS example data set you will need to modify your calibration directory and cycle mapping as detailed here: Cycle mapping files

Take notes of the following paths as we will need them later:

• The path to the folder you are currently in
• The name of the ‘calibration’ folder
• The name of the cycle mapping file

For example in the POLARIS example folder these filenames will be:

• Name of ‘calibration’ folder: Calibration
• Name of cycle mapping file: polaris_cycle_map_example.YAML - Note: you may not have file extensions showing, in that case you will see ‘polaris_cycle_map_example’ and need to insert .YAML after the filename

Creating the instrument object¶

Having introduced objects in: A quick introduction to objects we can now go ahead and create an instrument object.

from isis_powder import Polaris

# This name is arbitrary
a_pol_obj = Polaris()

If you try to run this code the script will complain whenever it comes across a parameter it requires but has not been set. The following parameters must be set for all instruments:

• user_name
• calibration_directory
• output_directory

There will also be additional instrument specific parameters required, a list of these can be found in the relevant instrument reference: Instrument Reference for example all instruments require a cycle mapping file. On HRPD, GEM and POLARIS this is called the calibration_mapping_file, on PEARL this is the calibration_config_path.

Using the above information we can start to populate the required parameters (see Paths to the required files for where these paths came from):

from isis_powder import Polaris

a_pol_obj = Polaris(user_name="Your name here",
                    calibration_directory=*Path to calibration directory*,
                    calibration_config_path=*Path to folder*\\*cycle mapping name.YAML*,
                    ....etc.)

Each time we execute the code it will inform us if a parameter is required at that point and we have forgotten to enter it. When you see Script execution finished it means we have enough information to create the instrument object.

In the next tutorial we will focus a vanadium run and use that to focus a standard sample.

How objects hold state in ISIS Powder¶

Additionally as the objects hold state we can set a parameter anywhere. For example on Polaris the mode parameter indicates the chopper state for this/these run(s). This can either be set when we create the object like this:

from isis_powder import Polaris

a_pol_obj = Polaris(mode="PDF", ....)
a_pol_obj.create_vanadium(...)

Or set whilst calling a method like this:

from isis_powder import Polaris

a_pol_obj = Polaris(...)
a_pol_obj.create_vanadium(mode="PDF", ...)

Both of the above are equivalent. Additionally if we change the value the scripts will warn us. This can be demonstrated with the following example:

from isis_powder import Polaris

a_pol_obj = Polaris(mode="PDF", ...)

# The following line will warn us we changed the chopper
# status from PDF to Rietveld. It will also remain
# in Rietveld mode from now on till we change it again
a_pol_obj.create_vanadium(mode="Rietveld", ...)

# Mode is still Rietveld on the following line
a_pol_obj.create_vanadium(...)

For these reasons it is recommended to create multiple objects when you need to switch between different settings within a script:

from isis_powder import Polaris

pol_PDF = Polaris(mode="PDF", ...)
pol_Rietveld = Polaris(mode="Rietveld", ...)

# Runs with the chopper set to PDF mode:
pol_PDF.create_vanadium(...)
# Runs with the chopper set to Rietveld mode:
pol_Rietveld.create_vanadium(...)

Creating the vanadium run¶

Because of the way objects hold state in ISIS Powder (see: How objects hold state in ISIS Powder) it is up to the reader of this tutorial where they set different parameters.

As previously mentioned each instrument has bespoke parameters and can be found in the individual instrument reference document: Instrument Reference

Additionally as noted previously this tutorial assumes the user is using the example ISIS data set ( see: Obtaining tutorial data). If they are not they will need to setup their cycle mapping to their data detailed here: Cycle mapping files

For Polaris we require the following parameters in addition to the parameters discussed to create the object (see Creating the instrument object):

• do_absorb_corrections - Indicates whether to account for absorption when processing the vanadium data. It is recommended to have this set to True
• first_cycle_run_no - Used to determine which cycle to create a vanadium for. For example on a cycle with runs 100-120 this value can be any value from 100-120 (e.g. 111)
• mode - Indicates what the chopper state was for this run
• multiple_scattering - Indicates whether to account for the effects of multiple scattering. For the tutorial it is highly recommended to set this to False as it will increase the script run time from seconds to 10-30 minutes.

Note: Due to the complexity of the Polaris instrument definition it will take Mantid up to 10 minutes to load your first data set for this instrument.

As we will be later focusing run number 98533 we can use that to ensure the correct cycle is selected for the first_cycle_run_no input.

from isis_powder import Polaris

# This should be set from the previous tutorial.
a_pol_obj = Polaris(....)
a_pol_obj.create_vanadium(first_cycle_run_no=98533,
                          do_absorb_corrections=True,
                          mode="Rietveld",
                          multiple_scattering=False)

Executing the above should now successfully process the vanadium run, you should have two resulting workspaces for the vanadium run in dSpacing and TOF. Additionally there will be another workspace containing the splines which will be used when focusing future data.

Focusing a data set¶

Having successfully processed a vanadium run (see: Creating the vanadium run) we are now able to focus a data set. For this tutorial we will be focusing a sample of Silicon.

It is highly recommended to create a separate script file for focusing data, this ensures the vanadium is not reprocessed every time data is focused.

To focus data we can call the focus method present on all instruments. As previously mentioned each instrument has bespoke parameters, these can be found in the individual instrument reference document: Instrument Reference

from isis_powder import Polaris
# This should be set from the previous tutorial.
a_pol_obj = Polaris(....)

a_pol_obj.focus(...)

To focus the Si sample included in the ISIS data set we require the following parameters:

• do_absorb_corrections - This will be covered in a later tutorial. It determines whether to perform sample absorption corrections on instruments which support this correction. For this tutorial please ensure it is set to False
• do_van_normalisation - Determines whether to divide the data set by the processed vanadium splines. This should be set to True.
• input_mode - Some instruments will not have this (in which case the data will always be summed). Acceptable values are "Individual" or "Summed". When set to individual each run will be loaded and processed separately, in summed all runs specified will be summed.
• mode - Indicates what the chopper state was for this run (eg "Rietveld")
• run_number - The run number or range of run numbers. This can either be a string or integer (plain number). For example "100-105, 107, 109-111" will process 100, 101, 102..., 105, 107, 109, 110, 111.

For this tutorial the run number will be 98533, and input_mode will not affect the result as it is a single run. Additionally in the example data you could focus 98534 (YAG sample) too.

from isis_powder import Polaris

# This should be set from the previous tutorial.
a_pol_obj = Polaris(....)
a_pol_obj.focus(input_mode="Individual", run_number=98533,
                mode="Rietveld",
                do_absorb_corrections=False,
                do_van_normalisation=True)

This will now process the data and produce two workspace groups for the results in dSpacing and TOF in addition to another group containing the spline(s) used whilst processing the data.

Congratulations you have now focused a data set using ISIS Powder.

Output files¶

After focusing the data it is saved in a variety of formats which suits the instrument. These can be found in the user specified output directory. The scripts will automatically create the label for the current cycle (covered in additional detail later Cycle mapping files).

Within the label folder a new folder will be created or used matching the user_name specified. Within that folder will be the output data in the various formats that is used on that instrument to perform data analysis.

Creating a configuration file¶

Navigate back to the files copied from the example folder (see: Copying instrument example files). There is a file we have not been using which will be named along the lines of ‘inst’_config_example.YAML.

This will come pre-configured with some examples of how parameters are set in the files. The names always match parameter names which can be found in the instrument reference documentation: Instrument Reference

For example if we currently have the output directory as follows:

from isis_powder import Polaris

# Note the r before " avoids us having to put \\
a_pol_obj = Polaris(output_directory=r"C:\path\to\your\output_dir", ....)

We can instead move it to the YAML file so it reads as follows:

# YAML FILE:
# Note the single quotes on a path in a YAML file
output_directory: 'C:\path\to\your\output_dir'

Additionally we can move parameters which should be defaults into the same file too:

#YAML FILE:
output_directory: 'C:\path\to\your\output_dir'
do_van_normalisation: True

Using the configuration file¶

You will need to make a note of the full path to the configuration file. Note that the filename entered must end with .YAML (even if it is not shown when browsing the files on your OS).

Setting the configuration file from the previous example we now have a default output directory and perform vanadium normalisation by default too.

from isis_powder import Polaris

config_file_path = r"C:\path\to\your\config_file.YAML"
a_pol_obj = Polaris(config_file=config_file_path, ...)
# Will now divide by the vanadium run by default as this was
# set in the configuration file
a_pol_obj.focus(...)

Any property set in the configuration file can be overridden. So if you require a different output directory for a specific script you can still use the original configuration file.

from isis_powder import Polaris

config_file_path = r"C:\path\to\your\config_file.YAML"

# Output directory changed to our own output directory,
# and warning emitted informing us this has happened
a_pol_obj = Polaris(config_file=config_file_path,
                    output_dir=r"C:\path\to\new\output_dir", ...)

# As the object has a state it will still be set to our custom
# output directory here (instead of configuration one) without
# restating it
a_pol_obj.focus(...)

It is recommended instrument scientists move optimal defaults (such as performing vanadium normalisation) into a configuration file which the scripts use.

Examples¶

These examples explain the layout and concept of YAML files. For instrument specific examples please look at the individual instrument reference document: Instrument Reference for an example specific to your instrument.

The simplest example of the calibration file is used on Pearl as the empty, label and vanadium are the same regardless of mode.

# This is the layout used on PEARL
# NB this example is not representative of actual run numbers
123-200:
  # Notice how the indentation changes to indicate it belongs
  # to this section
  label : "1_2"
  vanadium_run_numbers : "150"
  empty_run_numbers : "160"
  offset_file_name : "pearl_offset_1_2.cal"

On GEM the two chopper modes "PDF" and ""Rietveld"" affect the empty and vanadium run numbers used. In this case the additional indentation underneath the respective mode is used.

Fields can be left blank until a later date if runs in different modes have not been collected yet.

# This is the layout used on GEM
# NB this example is not representative of actual run numbers
123-200:
    label: "1_2"
    offset_file_name: "offsets.cal"
    PDF:
        # Blank entries are allowed provided we do not try to run in PDF mode
        vanadium_run_numbers: ""
        empty_run_numbers: ""
    # Notice it is not case sensitive
    rietveld:
        # The indentation indicates these are for Rietveld mode
        vanadium_run_numbers: "130"
        empty_run_numbers: "131"

Run numbers¶

The run numbers for a cycle use the same syntax as the run number field. You can specify ranges of runs, have gaps or individual runs. For example "100-103, 105" will specify runs 100, 101, 102, 103 and 105.

The mapping also allows unbounded runs, this is useful for a cycle that is in progress as the final run number of a cycle is unknown

1-122:
  label : "1_1"
  ...

123-:
  label : "1_2"
  ...

All runs from 1-122 inclusive will go use the details associated with label 1_1, whilst any runs after 123 will use label 1_2. These values also have validation to ensure that there is only one unbounded range and no values come after the starting interval. For example in the above example adding a section for runs 200- or 200-210 would fail validation.

Relation to calibration directory¶

The user specified calibration directory directly relates to a cycle mapping file. After writing or adapting a cycle mapping file for your instrument you must update the calibration directory. Using the cycle mapping from Peal:

# NB this example is not representative of actual run numbers
123-200:
  label : "1_2"
  vanadium_run_numbers : "150"
  empty_run_numbers : "160"
  offset_file_name : "pearl_offset_1_2.cal"

The relevant fields from the cycle mapping are the label and offset_file_name. Within the calibration directory a folder with the label name must exist. offset_file_name must either be the name of a cal file within that folder, or the full path to a cal file elsewhere.

In this example we need a folder within the calibration directory called 1_2 which holds a cal file called pearl_offset_1_2.cal.

Changing mid-cycle¶

The splines of the processed vanadium uses the run number and offset file name as a fingerprint to uniquely identify it. Because of this we can have two sets of details corresponding to the same cycle.

# NB this example is not representative of actual run numbers
123-150:
  label : "1_2"
  vanadium_run_numbers : "150"
  empty_run_numbers : "152"
  offset_file_name : "pearl_offset_1_2.cal"

151-200:
  label : "1_2"
  # Notice the changed details for runs 151 onwards
  vanadium_run_numbers : "170"
  empty_run_numbers : "160"
  offset_file_name : "pearl_offset_1_2-second.cal"

Create SampleDetails object¶

First we need to import the sample details object from ISIS Powder. The properties required when creating a SampleDetails object is the geometry of the sample.

Note: this assumes a cylinder geometry

• height - Cylinder height
• radius - Cylinder radius
• center - List of x, y, z positions of the cylinder

For more details see SetSample v1.

from isis_powder import Polaris, SampleDetails

# Creates a cylinder of height 3.0, radius 2.0
# at position 0, 1, 2 (x, y, z)
position = [0, 1, 2]

# Create a new sample details object
my_sample = SampleDetails(height=3.0, radius=2.0, center=position)

Setting the material details¶

Having set the sample geometry we can now set the chemical material and optionally the number density. If the chemical formula is not a single element the number density must be entered as it cannot be calculated.

For accepted syntax of chemical formulas see SetSampleMaterial v1. Specifically the section on specifying chemical composition if you are using isotopes. This will allow Mantid to automatically calculate the properties except for number density.

The material must be set before absorption corrections can be calculated for a sample.

... snip from previous example ...
my_sample = SampleDetails(height=3.0, radius=2.0, center=position)

my_sample.set_material(chemical_formula="V")
# OR
my_sample.set_material(chemical_formula="VNb", number_density=123)

Setting material properties¶

Advanced material properties can be optionally set instead of letting Mantid calculate them. These properties are:

• absorption_cross_section - Absorption Cross Section
• scattering_cross_section - Scattering Cross Section

Note: This is purely optional and Mantid will calculate these values based on the chemical formula entered if this is not set

... snip from previous example ...
my_sample = SampleDetails(height=3.0, radius=2.0, center=position)
my_sample.set_material(chemical_formula="VNb", number_density=123)

# Setting individual properties:
my_sample.set_material_properties(absorption_cross_section=123,
                                  scattering_cross_section=456)

Using the new SampleDetails object¶

Having created a new SampleDetails object (Create SampleDetails object) and then set the chemical material (Setting the material details) we can instruct the scripts to use these details whilst focusing.

This is done by calling set_sample_details on the instrument object, this will then use those sample details each time absorption corrections are applied to the sample. (See How objects hold state in ISIS Powder)

from isis_powder import Polaris, SampleDetails
... snip from previous examples ...
my_sample = SampleDetails(...)
my_sample.set_material(...)

polaris_obj = Polaris(...)
polaris_obj.set_sample_details(sample=my_sample)

# Indicate we want to perform sample absorption corrections whilst focusing
polaris_obj.focus(do_absorb_corrections=True, ...)

Changing sample properties¶

Note: The geometry of a sample cannot be changed without creating a new sample details object

Once you have set a material by calling set_material or set the properties by calling set_material_properties you will not be able to change (or set) these details without first resetting the object. This is to enforce the sample properties being set only once so that users are guaranteed of the state.

If you wish to change the chemical material or its advanced properties without creating a new sample details object you can call reset_sample_material. This will reset all details (i.e advanced properties and chemical properties)

from isis_powder import Polaris, SampleDetails

my_sample = SampleDetails(...)
my_sample.set_material(...)

# Next line will throw as it has already been set once
my_sample.set_material(...)
# This is still ok as its first time
my_sample.set_material_properties(...)

# Reset material
my_sample.reset_sample_material()
# Now allowed as object does not have a chemical formula associated
my_sample.set_material(...)