Multiply v1

../_images/Multiply-v1_dlg.png

Multiply dialog.

Summary

The Multiply algorithm will multiply the data values and calculate the corresponding error values of two compatible workspaces.

Properties

Name Direction Type Default Description
LHSWorkspace Input MatrixWorkspace Mandatory The name of the input workspace on the left hand side of the operation
RHSWorkspace Input MatrixWorkspace Mandatory The name of the input workspace on the right hand side of the operation
OutputWorkspace Output MatrixWorkspace Mandatory The name to call the output workspace
AllowDifferentNumberSpectra Input boolean False Are workspaces with different number of spectra allowed? For example, the LHSWorkspace might have one spectrum per detector, but the RHSWorkspace could have its spectra averaged per bank. If true, then matching between the LHS and RHS spectra is performed (all detectors in a LHS spectrum have to be in the corresponding RHS) in order to apply the RHS spectrum to the LHS.
ClearRHSWorkspace Input boolean False For EventWorkspaces only. This will clear out event lists from the RHS workspace as the binary operation is applied. This can prevent excessive memory use, e.g. when subtracting an EventWorkspace from another: memory use will be approximately constant instead of increasing by 50%. At completion, the RHS workspace will be empty.

Description

OutputWorkspace = LHSWorkspace * RHSWorkspace

The algorithm will perform the * operation on the data and associated errors from any two compatible workspaces. Workspaces are compatible if:

  • The sizes of the two workspaces are compatible (see below)
  • If the two workspaces contain Y bins then the values in these must be identical
  • the units of the axes match
  • the distribution status/counts units match

For information about how errors are handled and propagated see Error Propagation.

Compatible Sizes

Workspaces are compatible if they are identically sized in which case the values of each cell within each histogram are multiplied individually. The green arrows shows the order in which the data is multiplied. alt text
They are also compatible if they match the size dimension horizontally, in which case the same values are multiplied by each histogram in the workspace. alt text
If AllowDifferentNumberSpectra is True, then the LHS and RHS spectra are matched using detector IDs. The corresponding spectra are multiplied by the matching counterpart. alt text
If they match in size vertically then the data values will be multiplied by each bin of the histogram. alt text

Finally a workspace containing a single value is compatible to any workspace, in which case the same value will be multiplied uniformly by every bin in each histogram.

Operations on EventWorkspaces vs Workspace2Ds

LHS * RHS = Output Notes
Workspace2D * Workspace2D = Workspace2D The number of bins DO need to match for both operands.
Workspace2D * EventWorkspace = Workspace2D The histogram representation of the RHS EventWorkspace is used as the right-hand operand. The number of bins DO need to match for both operands.
EventWorkspace * EventWorkspace = EventWorkspace The histogram representation of the RHS EventWorkspace is used as the right-hand operand. The number of bins DO NOT need to match for both operands. The output EventWorkspace will use WeightedEvents, where each event’s weight will have been multiplied by the Y value at the corresponding X bin on the RHS.
EventWorkspace * Workspace2D = EventWorkspace The histogram representation of the RHS EventWorkspace is used as the right-hand operand. The number of bins DO NOT need to match for both operands.
EventWorkspace * WorkspaceSingleValue = EventWorkspace The value (and error) is applied to the weight of every event in the workspace. The output EventWorkspace will use WeightedEvents. If Output–LHS, then the operation is performed in-place and no copying of workspaces is done.

Usage

Example - Multiply as an algorithm

# create histogram workspaces
dataX1 = [0,1,2,3,4,5,6,7,8,9] # or use dataX1=range(0,10)
dataY1 = [0,1,2,3,4,5,6,7,8] # or use dataY1=range(0,9)
dataE1 = [0,1,2,3,4,5,6,7,8] # or use dataE1=range(0,9)
dataX2 = [0,1,2,3,4,5,6,7,8,9] #X-values must be identical
dataY2 = [2,2,2,2,2,2,2,2,2]
dataE2 = [3,3,3,3,3,3,3,3,3]
ws1 = CreateWorkspace(dataX1, dataY1, dataE1)
ws2 = CreateWorkspace(dataX2, dataY2, dataE2)

# perform the algorithm
ws = Multiply(ws1, ws2)

print("The X values are: {}".format(ws.readX(0)))
print("The Y values are: {}".format(ws.readY(0)))
print("The updated Error values are: {}".format(ws.readE(0)))

Output:

The X values are: [ 0.  1.  2.  3.  4.  5.  6.  7.  8.  9.]
The Y values are: [  0.   2.   4.   6.   8.  10.  12.  14.  16.]
The updated Error values are: [  0.           3.60555128   7.21110255  10.81665383  14.4222051
  18.02775638  21.63330765  25.23885893  28.8444102 ]

Example - Multiply as an operator

# create histogram workspaces
dataX1 = [0,1,2,3,4,5,6,7,8,9] # or use dataX1=range(0,10)
dataY1 = [0,1,2,3,4,5,6,7,8] # or use dataY1=range(0,9)
dataE1 = [0,1,2,3,4,5,6,7,8] # or use dataE1=range(0,9)
dataX2 = [0,1,2,3,4,5,6,7,8,9] #X-values must be identical
dataY2 = [2,2,2,2,2,2,2,2,2]
dataE2 = [3,3,3,3,3,3,3,3,3]
ws1 = CreateWorkspace(dataX1, dataY1, dataE1)
ws2 = CreateWorkspace(dataX2, dataY2, dataE2)

# perform the algorithm
ws = ws1 * ws2

print("The X values are: {}".format(ws.readX(0)))
print("The Y values are: {}".format(ws.readY(0)))
print("The updated Error values are: {}".format(ws.readE(0)))

Output:

The X values are: [ 0.  1.  2.  3.  4.  5.  6.  7.  8.  9.]
The Y values are: [  0.   2.   4.   6.   8.  10.  12.  14.  16.]
The updated Error values are: [  0.           3.60555128   7.21110255  10.81665383  14.4222051
  18.02775638  21.63330765  25.23885893  28.8444102 ]

Example - Multiply using in-place operator

# create histogram workspaces
dataX1 = [0,1,2,3,4,5,6,7,8,9] # or use dataX1=range(0,10)
dataY1 = [0,1,2,3,4,5,6,7,8] # or use dataY1=range(0,9)
dataE1 = [0,1,2,3,4,5,6,7,8] # or use dataE1=range(0,9)
dataX2 = [0,1,2,3,4,5,6,7,8,9] #X-values must be identical
dataY2 = [2,2,2,2,2,2,2,2,2]
dataE2 = [3,3,3,3,3,3,3,3,3]
ws = CreateWorkspace(dataX1, dataY1, dataE1)
ws1 = CreateWorkspace(dataX2, dataY2, dataE2)

# perform the algorithm
ws *= ws1

print("The X values are: {}".format(ws.readX(0)))
print("The Y values are: {}".format(ws.readY(0)))
print("The updated Error values are: {}".format(ws.readE(0)))

Output:

The X values are: [ 0.  1.  2.  3.  4.  5.  6.  7.  8.  9.]
The Y values are: [  0.   2.   4.   6.   8.  10.  12.  14.  16.]
The updated Error values are: [  0.           3.60555128   7.21110255  10.81665383  14.4222051
  18.02775638  21.63330765  25.23885893  28.8444102 ]

Example - Multiply with a Scalar

# create histogram workspaces
dataX1 = [0,1,2,3,4,5,6,7,8,9] # or use dataX1=range(0,10)
dataY1 = [0,1,2,3,4,5,6,7,8] # or use dataY1=range(0,9)
dataE1 = [0,1,2,3,4,5,6,7,8] # or use dataE1=range(0,9)
ws1 = CreateWorkspace(dataX1, dataY1, dataE1)

# perform the algorithm
ws = ws1 * 2.5

print("The X values are: {}".format(ws.readX(0)))
print("The Y values are: {}".format(ws.readY(0)))
print("The updated Error values are: {}".format(ws.readE(0)))

Output:

The X values are: [ 0.  1.  2.  3.  4.  5.  6.  7.  8.  9.]
The Y values are: [  0.    2.5   5.    7.5  10.   12.5  15.   17.5  20. ]
The updated Error values are: [  0.    2.5   5.    7.5  10.   12.5  15.   17.5  20. ]

Categories: AlgorithmIndex | Arithmetic

Source

C++ source: Multiply.cpp (last modified: 2019-01-18)

C++ header: Multiply.h (last modified: 2019-01-07)