SetupHFIRReduction dialog.
Table of Contents
| Name | Direction | Type | Default | Description |
|---|---|---|---|---|
| SampleDetectorDistance | Input | number | Optional | Sample to detector distance to use (overrides meta data), in mm |
| SampleDetectorDistanceOffset | Input | number | Optional | Offset to the sample to detector distance (use only when using the distance found in the meta data), in mm |
| SolidAngleCorrection | Input | boolean | True | If true, the solid angle correction will be applied to the data |
| DetectorTubes | Input | boolean | False | If true, the solid angle correction for tube detectors will be applied |
| DetectorWing | Input | boolean | False | If true, the solid angle correction for the Wing Detector (curved detector) will be applied |
| Wavelength | Input | number | Optional | Wavelength value to use when loading the data file (Angstrom). |
| WavelengthSpread | Input | number | 0.1 | Wavelength spread to use when loading the data file (default 0.0) |
| BeamCenterMethod | Input | string | None | Method for determining the data beam center. Allowed values: [‘None’, ‘Value’, ‘DirectBeam’, ‘Scattering’] |
| BeamCenterX | Input | number | Optional | Position of the beam center, in pixel |
| BeamCenterY | Input | number | Optional | Position of the beam center, in pixel |
| BeamCenterFile | Input | string | The name of the input data file to load. Allowed extensions: [‘.xml’] | |
| BeamRadius | Input | number | Optional | Radius of the beam area used the exclude the beam when calculating the center of mass of the scattering pattern [pixels]. Default=3.0 |
| Normalisation | Input | string | Monitor | Options for data normalisation. Allowed values: [‘None’, ‘Monitor’, ‘Timer’] |
| DarkCurrentFile | Input | string | The name of the input data file to load as dark current. Allowed extensions: [‘.xml’] | |
| SensitivityFile | Input | string | Flood field or sensitivity file. Allowed extensions: [‘.xml’] | |
| MinEfficiency | Input | number | Optional | Minimum efficiency for a pixel to be considered (default: no minimum). |
| MaxEfficiency | Input | number | Optional | Maximum efficiency for a pixel to be considered (default: no maximum). |
| UseDefaultDC | Input | boolean | True | If true, the dark current subtracted from the sample data will also be subtracted from the flood field. |
| SensitivityDarkCurrentFile | Input | string | The name of the input file to load as dark current. Allowed extensions: [‘.xml’] | |
| SensitivityBeamCenterMethod | Input | string | None | Method for determining the sensitivity data beam center. Allowed values: [‘None’, ‘Value’, ‘DirectBeam’, ‘Scattering’] |
| SensitivityBeamCenterX | Input | number | Optional | Sensitivity beam center location in X [pixels] |
| SensitivityBeamCenterY | Input | number | Optional | Sensitivity beam center location in Y [pixels] |
| SensitivityBeamCenterFile | Input | string | The name of the input data file to load. Allowed extensions: [‘.xml’] | |
| SensitivityBeamCenterRadius | Input | number | Optional | Radius of the beam area used the exclude the beam when calculating the center of mass of the scattering pattern [pixels]. Default=3.0 |
| OutputSensitivityWorkspace | Output | MatrixWorkspace | ||
| TransmissionMethod | Input | string | Value | Transmission determination method. Allowed values: [‘Value’, ‘DirectBeam’, ‘BeamSpreader’] |
| TransmissionValue | Input | number | Optional | Transmission value. |
| TransmissionError | Input | number | Optional | Transmission error. |
| TransmissionBeamRadius | Input | number | 3 | Radius of the beam area used to compute the transmission [pixels] |
| TransmissionSampleDataFile | Input | string | Sample data file for transmission calculation. Allowed extensions: [‘.xml’] | |
| TransmissionEmptyDataFile | Input | string | Empty data file for transmission calculation. Allowed extensions: [‘.xml’] | |
| TransmissionBeamCenterMethod | Input | string | None | Method for determining the transmission data beam center. Allowed values: [‘None’, ‘Value’, ‘DirectBeam’, ‘Scattering’] |
| TransmissionBeamCenterX | Input | number | Optional | Transmission beam center location in X [pixels] |
| TransmissionBeamCenterY | Input | number | Optional | Transmission beam center location in Y [pixels] |
| TransmissionBeamCenterFile | Input | string | The name of the input data file to load. Allowed extensions: [‘.xml’] | |
| TransSampleSpreaderFilename | Input | string | Allowed extensions: [‘.xml’] | |
| TransDirectSpreaderFilename | Input | string | Allowed extensions: [‘.xml’] | |
| TransSampleScatteringFilename | Input | string | Allowed extensions: [‘.xml’] | |
| TransDirectScatteringFilename | Input | string | Allowed extensions: [‘.xml’] | |
| SpreaderTransmissionValue | Input | number | 1 | Beam spreader transmission value |
| SpreaderTransmissionError | Input | number | 0 | Beam spreader transmission error |
| TransmissionDarkCurrentFile | Input | string | The name of the input data file to load as transmission dark current. Allowed extensions: [‘.xml’] | |
| TransmissionUseSampleDC | Input | boolean | True | If true, the sample dark current will be used IF a dark current file isnot set. |
| ThetaDependentTransmission | Input | boolean | True | If true, a theta-dependent transmission correction will be applied. |
| BackgroundFiles | Input | string | Background data files | |
| BckTransmissionMethod | Input | string | Value | Transmission determination method. Allowed values: [‘Value’, ‘DirectBeam’, ‘BeamSpreader’] |
| BckTransmissionValue | Input | number | Optional | Transmission value. |
| BckTransmissionError | Input | number | Optional | Transmission error. |
| BckTransmissionBeamRadius | Input | number | 3 | Radius of the beam area used to compute the transmission [pixels] |
| BckTransmissionSampleDataFile | Input | string | Sample data file for transmission calculation. Allowed extensions: [‘.xml’] | |
| BckTransmissionEmptyDataFile | Input | string | Empty data file for transmission calculation. Allowed extensions: [‘.xml’] | |
| BckTransmissionBeamCenterMethod | Input | string | None | Method for determining the transmission data beam center. Allowed values: [‘None’, ‘Value’, ‘DirectBeam’, ‘Scattering’] |
| BckTransmissionBeamCenterX | Input | number | Optional | Transmission beam center location in X [pixels] |
| BckTransmissionBeamCenterY | Input | number | Optional | Transmission beam center location in Y [pixels] |
| BckTransmissionBeamCenterFile | Input | string | The name of the input data file to load. Allowed extensions: [‘.xml’] | |
| BckTransSampleSpreaderFilename | Input | string | Allowed extensions: [‘.xml’] | |
| BckTransDirectSpreaderFilename | Input | string | Allowed extensions: [‘.xml’] | |
| BckTransSampleScatteringFilename | Input | string | Allowed extensions: [‘.xml’] | |
| BckTransDirectScatteringFilename | Input | string | Allowed extensions: [‘.xml’] | |
| BckSpreaderTransmissionValue | Input | number | 1 | Beam spreader transmission value |
| BckSpreaderTransmissionError | Input | number | 0 | Beam spreader transmission error |
| BckTransmissionDarkCurrentFile | Input | string | The name of the input data file to load as background transmission dark current. Allowed extensions: [‘.xml’] | |
| BckThetaDependentTransmission | Input | boolean | True | If true, a theta-dependent transmission correction will be applied. |
| SampleThickness | Input | number | Optional | Sample thickness [cm] |
| MaskedDetectorList | Input | int list | List of detector IDs to be masked | |
| MaskedEdges | Input | int list | Number of pixels to mask on the edges: X-low, X-high, Y-low, Y-high | |
| MaskedComponent | Input | string | Component Name to mask the edges according to the IDF file. | |
| MaskedSide | Input | string | None | Mask one side of the detector. Allowed values: [‘None’, ‘Front’, ‘Back’] |
| MaskedFullComponent | Input | string | Component Name to mask the edges according to the IDF file. | |
| AbsoluteScaleMethod | Input | string | None | Absolute scale correction method. Allowed values: [‘None’, ‘Value’, ‘ReferenceData’] |
| AbsoluteScalingFactor | Input | number | 1 | Absolute scaling factor |
| AbsoluteScalingReferenceFilename | Input | string | Allowed extensions: [‘.xml’] | |
| AbsoluteScalingBeamDiameter | Input | number | 0 | Beamstop diameter for computing the absolute scale factor [mm]. Read from file if not supplied. |
| AbsoluteScalingAttenuatorTrans | Input | number | 1 | Attenuator transmission value for computing the absolute scale factor |
| AbsoluteScalingApplySensitivity | Input | boolean | False | Apply sensitivity correction to the reference data when computing the absolute scale factor |
| DoAzimuthalAverage | Input | boolean | True | |
| IQBinning | Input | dbl list | ||
| IQNumberOfBins | Input | number | 100 | Number of I(q) bins when binning is not specified. |
| IQLogBinning | Input | boolean | False | I(q) log binning when binning is not specified. |
| IQAlignLogWithDecades | Input | boolean | False | If true and log binning was selected, the bins will be aligned to log decades and the number of bins will be used as the number of bins per decade. |
| NumberOfSubpixels | Input | number | 1 | Number of sub-pixels used for each detector pixel in each direction.The total number of sub-pixels will be NPixelDivision*NPixelDivision. |
| ErrorWeighting | Input | boolean | False | Choose whether each pixel contribution will be weighted by 1/error^2. |
| NumberOfWedges | Input | number | 2 | Number of wedges to calculate. |
| WedgeAngle | Input | number | 30 | Opening angle of each wedge, in degrees. |
| WedgeOffset | Input | number | 0 | Angular offset for the wedges, in degrees. |
| Do2DReduction | Input | boolean | True | |
| IQ2DNumberOfBins | Input | number | 100 | Number of I(qx,qy) bins. |
| IQxQyLogBinning | Input | boolean | False | I(qx,qy) log binning when binning is not specified. |
| ProcessInfo | Input | string | Additional process information | |
| OutputDirectory | Input | string | Directory to put the output files in | |
| OutputMessage | Output | string | ||
| ReductionProperties | Input | string | __sans_reduction_properties |
Create a PropertyManager object setting the reduction options for HFIR SANS. The property manager object is then added to the PropertyManagerDataService.
See HFIRSANSReduction for details.
Categories: AlgorithmIndex | Workflow\SANS
C++ source: SetupHFIRReduction.cpp (last modified: 2019-06-05)
C++ header: SetupHFIRReduction.h (last modified: 2018-10-05)