\(\renewcommand\AA{\unicode{x212B}}\)
CalculateCoverageDGS dialog.
Table of Contents
| Name | Direction | Type | Default | Description |
|---|---|---|---|---|
| InputWorkspace | Input | MatrixWorkspace | Mandatory | An input workspace. |
| Q1Basis | Input | dbl list | 1,0,0 | Q1 projection direction in the x,y,z format. Q1, Q2, Q3 must not be coplanar |
| Q2Basis | Input | dbl list | 0,1,0 | Q2 projection direction in the x,y,z format. Q1, Q2, Q3 must not be coplanar |
| Q3Basis | Input | dbl list | 0,0,1 | Q3 projection direction in the x,y,z format. Q1, Q2, Q3 must not be coplanar |
| IncidentEnergy | Input | number | Optional | Incident energy. If set, will override Ei in the input workspace |
| Dimension1 | Input | string | Q1 | Dimension to bin or integrate. Allowed values: [‘Q1’, ‘Q2’, ‘Q3’, ‘DeltaE’] |
| Dimension1Min | Input | number | Optional | Dimension1 minimum value. If empty will take minimum possible value. |
| Dimension1Max | Input | number | Optional | Dimension1 maximum value. If empty will take maximum possible value. |
| Dimension1Step | Input | number | Optional | Dimension1 step size. If empty the dimension will be integrated between minimum and maximum values |
| Dimension2 | Input | string | Q2 | Dimension to bin or integrate. Allowed values: [‘Q1’, ‘Q2’, ‘Q3’, ‘DeltaE’] |
| Dimension2Min | Input | number | Optional | Dimension2 minimum value. If empty will take minimum possible value. |
| Dimension2Max | Input | number | Optional | Dimension2 maximum value. If empty will take maximum possible value. |
| Dimension2Step | Input | number | Optional | Dimension2 step size. If empty the dimension will be integrated between minimum and maximum values |
| Dimension3 | Input | string | Q3 | Dimension to bin or integrate. Allowed values: [‘Q1’, ‘Q2’, ‘Q3’, ‘DeltaE’] |
| Dimension3Min | Input | number | Optional | Dimension3 minimum value. If empty will take minimum possible value. |
| Dimension3Max | Input | number | Optional | Dimension3 maximum value. If empty will take maximum possible value. |
| Dimension3Step | Input | number | Optional | Dimension3 step size. If empty the dimension will be integrated between minimum and maximum values |
| Dimension4 | Input | string | DeltaE | Dimension to bin or integrate. Allowed values: [‘Q1’, ‘Q2’, ‘Q3’, ‘DeltaE’] |
| Dimension4Min | Input | number | Optional | Dimension4 minimum value. If empty will take minimum possible value. |
| Dimension4Max | Input | number | Optional | Dimension4 maximum value. If empty will take maximum possible value. |
| Dimension4Step | Input | number | Optional | Dimension4 step size. If empty the dimension will be integrated between minimum and maximum values |
| OutputWorkspace | Output | Workspace | Mandatory | A name for the output data MDHistoWorkspace. |
The algorithm calculates what part of the reciprocal space is covered by direct geometry spectrometers. It is supposed to be used in planning tools. The input workspace should contain the incident energy log, a goniometer, and the UB matrix. The incident energy can be overwritten by setting the IncidentEnergy parameter. The output is an MDHisto workspace. You can visualize it with SliceViewer.
The parameters Q1Basis, Q2Basis, Q3Basis can be used to look at different directions in the reciprocal space, such as [H,H,0]
DimensionI, where I is from 1 to 4, allows one to select in which order Q1, Q2, Q3, DeltaE are stored in the output workspace. The algorithm will complain if you select the same dimension twice. For each dimension one can define minimum, maximum, and step size. If no minimum/maximum are set for DeltaE, these are chosen to be +/-Ei. If not specified, minimum/maximum for the Q dimensions are calculated based on the instrument geometry, incident energy, minimum/maximum for DeltaE, and lattice parameters.
The algorithm calculates detector trajectories in the reciprocal space and sets to 1 the corresponding points in the output workspace. All other points are 0.
Note
To run these usage examples please first download the usage data, and add these to your path. In Mantid this is done using Manage User Directories.
Example - CalculateCoverageDGS
w=Load(Filename="CNCS_7860")
w=ConvertUnits(InputWorkspace=w,Target='DeltaE', EMode='Direct', EFixed='3')
SetGoniometer(Workspace=w, Axis0='30,0,1,0,1')
SetUB(Workspace=w, a='2', b='2', c='2')
w=Rebin(InputWorkspace=w, Params='-3,0.1,3', PreserveEvents='0')
coverage=CalculateCoverageDGS(InputWorkspace=w, IncidentEnergy=3,
Dimension1Min=-1, Dimension1Max=1, Dimension1Step=0.02,
Dimension2Min=-1, Dimension2Max=1, Dimension2Step=2,
Dimension3Min=-1, Dimension3Max=1, Dimension3Step=2,
Dimension4Min=0, Dimension4Max=3, Dimension4Step=0.1)
# Print the result
print("You cover {:.0f} MD bins out of {}".format(coverage.getSignalArray().sum(),coverage.getSignalArray().size))
Output:
You cover 506 MD bins out of 3000
Categories: AlgorithmIndex | Inelastic\Planning | MDAlgorithms\Planning
C++ header: CalculateCoverageDGS.h (last modified: 2020-03-20)
C++ source: CalculateCoverageDGS.cpp (last modified: 2020-04-07)