\(\renewcommand\AA{\unicode{x212B}}\)
LoadVesuvio dialog.
Table of Contents
| Name | Direction | Type | Default | Description |
|---|---|---|---|---|
| Filename | Input | string | Mandatory | The run numbers that should be loaded. E.g.14188 - for single run14188-14195 - for summed consecutive runs14188,14195 - for summed non-consecutive runs |
| SpectrumList | Input | string | Mandatory | The spectrum numbers to load. A dash will load a range and a semicolon delimits spectra to sum |
| Mode | Input | string | DoubleDifference | The difference option. Valid values: [‘SingleDifference’, ‘DoubleDifference’, ‘ThickDifference’, ‘FoilOut’, ‘FoilIn’, ‘FoilInOut’]. Allowed values: [‘SingleDifference’, ‘DoubleDifference’, ‘ThickDifference’, ‘FoilOut’, ‘FoilIn’, ‘FoilInOut’] |
| InstrumentParFile | Input | string | An optional IP file. If provided the values are used to correct the default instrument values and attach the t0 values to each detector. Allowed values: [‘dat’, ‘par’] | |
| SumSpectra | Input | boolean | False | If true then the final output is a single spectrum containing the sum of all of the requested spectra. All detector angles/parameters are averaged over the individual inputs |
| LoadMonitors | Input | boolean | False | If true then the monitor data is loaded and will be output by the algorithm into a separate workspace. |
| LoadLogFiles | Input | boolean | True | If true, then the log files for the specified runs will be loaded. |
| OutputWorkspace | Output | Workspace | Mandatory | The name of the output workspace. |
The Vesuvio instrument at ISIS produces RAW <http://www.mantidproject.org/Raw File> files in the standard format. However, due to the unique design of the instrument the raw counts from the input files must be manipulated before they are considered useful.
This algorithm wraps calls to LoadRaw and computes the counts (\(\mu s^{-1}\)) using the foil-cycling method described here.
The output is point data and not a histogram.
There is an option to specify an ascii instrument parameter file to specify new detector positions along with a t0 delay time parameter for each detector.
Vesuvio as an instrument has the ability to analyse both forward and back scattering from the sample. In addition, when data is collected, foils are put in front of, or remove from, the detectors. The foils are different for forward and back scattering. In forward scattering, there are only 2 foils states, the foil is either in front of the detector (foil in) or not infront of the detector (foil out). In back scattering there are 3 foil states. Like in forward scattering there is both a foil in and foil out state, but in addition to this there is also a foil thick state which is where a thicker foil is placed in front of the detector.
Vesuvio allows for measurements to be taken in different periods:
When loading data from .RAW files using this algorithm, several differencing modes can be used:
From the above modes of operation on Vesuvio we can deduce a table of valid combinations of scattering and differencing for each period. This is shown in the tables below:
Gold foils only move in forward scattering, so only differencing in forward scattering is valid.
| Scattering | Single Difference | Thick Difference | Double Difference |
|---|---|---|---|
| Forward | Valid | NEVER | NEVER |
| Back | Not Valid | Not Valid | Not Valid |
Load a single file & spectrum with default difference:
tof = LoadVesuvio("14188",SpectrumList=135)
print("Number of spectra: {}".format(tof.getNumberHistograms()))
Output:
Number of spectra: 1
Sum runs on single spectrum with default difference:
tof = LoadVesuvio("14188-14193",SpectrumList=135)
print("Number of spectra: {}".format(tof.getNumberHistograms()))
Output:
Number of spectra: 1
Sum runs on a range of spectra with default difference:
tof = LoadVesuvio("14188-14193",SpectrumList="135-142")
print("Number of spectra: {}".format(tof.getNumberHistograms()))
Output:
Number of spectra: 8
Sum runs and spectra on a range of spectra with default difference:
tof = LoadVesuvio("14188-14193",SpectrumList="135-142", SumSpectra=True)
print("Number of spectra: {}".format(tof.getNumberHistograms()))
Output:
Number of spectra: 1
Sum runs and spectra on a range of spectra using single difference method:
tof = LoadVesuvio("14188-14193",SpectrumList="135-142", SumSpectra=True,
Mode="SingleDifference")
print("Number of spectra: {}".format(tof.getNumberHistograms()))
Output:
Number of spectra: 1
Categories: AlgorithmIndex | DataHandling\Raw
Python: LoadVesuvio.py (last modified: 2020-03-27)