\(\renewcommand\AA{\unicode{x212B}}\)

LoadMuonNexus v1¶

LoadMuonNexus dialog.

Table of Contents

Summary
Properties
Description
Source

Summary ¶

The LoadMuonNexus algorithm will read the given NeXus Muon data file Version 1 and use the results to populate the named workspace. LoadMuonNexus may be invoked by LoadNexus if it is given a NeXus file of this type.

Properties ¶

Name	Direction	Type	Default	Description
Filename	Input	string	Mandatory	The name of the Nexus file to load. Allowed extensions: [‘.nxs’]
OutputWorkspace	Output	Workspace	Mandatory	The name of the workspace to be created as the output of the algorithm. For multiperiod files, one workspace will be generated for each period
SpectrumMin	Input	number	0	Index number of the first spectrum to read
SpectrumMax	Input	number	Optional	Index of last spectrum to read (default the last spectrum)
SpectrumList	Input	int list		Array, or comma separated list, of indexes of spectra to load. If a range and a list of spectra are both supplied, all the specified spectra will be loaded.
AutoGroup	Input	boolean	False	Determines whether the spectra are automatically grouped together based on the groupings in the NeXus file, only for single period data (default no). Version 1 only.
EntryNumber	Input	number	0	0 indicates that every entry is loaded, into a separate workspace within a group. A positive number identifies one entry to be loaded, into one workspace
MainFieldDirection	Output	string		Output the main field direction if specified in Nexus file (run/instrument/detector/orientation, default longitudinal). Version 1 only. Allowed values: [‘Transverse’, ‘Longitudinal’]
TimeZero	Output	number		Time zero in units of micro-seconds (default to 0.0)
FirstGoodData	Output	number		First good data in units of micro-seconds (default to 0.0)
LastGoodData	Output	number		Last good data in the OutputWorkspace’s spectra
TimeZeroList	Output	dbl list		A vector of time zero values
TimeZeroTable	Output	Workspace		TableWorkspace containing time zero values per spectra.
CorrectTime	Input	boolean	True	Boolean flag controlling whether time should be corrected by timezero.
DeadTimeTable	Output	Workspace		Table or a group of tables containing detector dead times. Version 1 only.
DetectorGroupingTable	Output	Workspace		Table or a group of tables with information about the detector grouping stored in the file (if any). Version 1 only.

Description ¶

The algorithm LoadMuonNexus will read a Muon Nexus data file (original format) and place the data into the named workspace. The file name can be an absolute or relative path and should have the extension .nxs or .NXS. If the file contains data for more than one period, a separate workspace will be generated for each. After the first period the workspace names will have “_2”, “_3”, and so on, appended to the given workspace name. The optional parameters can be used to control which spectra are loaded into the workspace. If SpectrumMin and SpectrumMax are given, then only that range of data will be loaded. If a SpectrumList is given, then those values will be loaded. If a range and a list are supplied, the algorithm will load all the specified spectra.

TODO get XML descriptions of Muon instruments. This data is not in existing Muon Nexus files.

Spectra-detector mapping ¶

For all v1 muon Nexus files, there is a one-to-one mapping between spectrum number and detector ID.

Time series data ¶

The log data in the Nexus file (NX_LOG sections) will be loaded as TimeSeriesProperty data within the workspace. Time (stored as seconds from the Unix epoch in the Nexus file) is corrected relative to the start time found in run/start_time.

This time series data comprises various values logged by SECI and includes magnetic fields, temperatures, status codes, count rate and beam logs.

See LoadMuonLog v1 for more details.

Errors ¶

The error for each histogram count is set as the square root of the number of counts.

Time bin data ¶

The corrected_times field of the Nexus file is used to provide time bin data and the bin edge values are calculated from these bin centre times.

Multiperiod data ¶

To determine if a file contains data from more than one period the field switching_states is read from the Nexus file. If this value is greater than one it is taken to be the number of periods, \(N_p\) of the data. In this case the \(N_s\) spectra in the histogram_data field are split with \(N_s/N_p\) assigned to each period.

Dead times and detector grouping ¶

Muon Nexus v1 files might contain dead time and detector grouping information. These are loaded as TableWorkspaces of the format accepted by ApplyDeadTimeCorr v1 and MuonGroupDetectors v1 accordingly. These are returned if and only if names are specified for the properties. For multi-period data workspace groups might be returned, if information in the Nexus files contains this information for each period.

If the file contains no grouping entry (or the entry is full of zeros), the grouping will be loaded from the IDF instead. If this also fails, a dummy grouping will be created. In either case, a message will be displayed in the log to explain this.

Details of data loaded ¶

Here are more details of data loaded from the Nexus file. Conventionally, the first NX_ENTRY is called run and the first NX_DATA under this is called histogram_data_1, and these names are used below.

Description of Data	Found in Nexus file	Placed in Workspace (Workspace2D) or output
Detector data	Times (X): `run/histogram_data_1/corrected_time` Counts (Y): `run/histogram_data_1/counts` (2D array of counts in each time bin per detector) Errors: square root of counts	Histogram data of workspace
Instrument	Name from `run/instrument/name` Uses child algorithm LoadInstrument to load the instrument of that name	Workspace instrument (as loaded by LoadInstrument from IDF)
Title (optional)	`run/title`	Workspace title
Comment (optional)	`run/notes`	Workspace comment
Time zero (optional)	`run/histogram_data_1/time_zero`	TimeZero property
First good data (optional)	Calculated from first good bin and bin size. First good bin: `run/histogram_data_1/counts` (attribute `first_good_bin`) Bin size: `run/histogram_data_1/resolution`	FirstGoodData property (First good data - time zero) also goes in run object under the name `FirstGoodData`
Detector grouping table (optional)	`run/histogram_data_1/grouping` If not present, or invalid, loads from IDF. If that also fails, creates dummy grouping (all detectors in one group).	DetectorGroupingTable property
Dead time table (optional)	`run/instrument/detector/deadtimes`	DeadTimeTable property
Main field direction (optional)	`run/instrument/detector/orientation` Assumed to be longitudinal if not present	MainFieldDirection property Also in run object as `main_field_direction`
Sample name	`run/sample/name`	Name of sample object
Run	See below	Run object (see below)

Run Object ¶

Log values are loaded into the workspace run object as follows:

Nexus	Workspace run object
`run/title`	`run_title`
(data)	`nspectra`
`run/start_time`	`run_start`
`run/stop_time`	`run_end`
`run/duration`	`dur`, `dur_secs` (same), `durunits` = 1 (seconds)
`run/number`	`run_number`
`run/sample/temperature`	`sample_temp`
`run/sample/magnetic_field`	`sample_magn_field`
`run/instrument/beam/frames_good` (for single-period data) (If `frames_good` not present, use `frames` instead.)	`goodfrm` (number of good frames)
`run/instrument/beam/frames_period_daq` (for multi-period data)	`goodfrm` (number of good frames)
Other NX_LOG entries under `run`	time series (via LoadMuonLog)

ChildAlgorithms used ¶

The ChildAlgorithms used by LoadMuonNexus are:

LoadMuonLog v1 - this reads log information from the Nexus file and uses it to create TimeSeriesProperty entries in the workspace.
LoadInstrument v1 - this algorithm looks for an XML description of the instrument and if found reads it.
LoadInstrumentFromNexus v1 - this is called if the normal LoadInstrument fails. As the Nexus file has limited instrument data, this only populates a few fields.

Categories: AlgorithmIndex | DataHandling\Nexus | Muon\DataHandling

Source ¶

C++ header: LoadMuonNexus.h (last modified: 2021-04-20)

C++ source: LoadMuonNexus.cpp (last modified: 2021-08-06)