\(\renewcommand\AA{\unicode{x212B}}\)

FlatPlateAbsorption v1

FlatPlateAbsorption dialog.

Summary

Calculates bin-by-bin correction factors for attenuation due to absorption and scattering in a sample of ‘flat plate’ geometry.

See Also

AbsorptionCorrection

Properties

Name	Direction	Type	Default	Description
InputWorkspace	Input	MatrixWorkspace	Mandatory	The X values for the input workspace must be in units of wavelength
OutputWorkspace	Output	MatrixWorkspace	Mandatory	Output workspace name
ScatterFrom	Input	string	Sample	The component to calculate the absorption for (default: Sample). Allowed values: [‘Sample’, ‘Container’, ‘Environment’]
AttenuationXSection	Input	number	Optional	The ABSORPTION cross-section, at 1.8 Angstroms, for the sample material in barns. Column 8 of a table generated from http://www.ncnr.nist.gov/resources/n-lengths/.
ScatteringXSection	Input	number	Optional	The (coherent + incoherent) scattering cross-section for the sample material in barns. Column 7 of a table generated from http://www.ncnr.nist.gov/resources/n-lengths/.
SampleNumberDensity	Input	number	Optional	The number density of the sample in number of atoms per cubic angstrom if not set with SetSampleMaterial
NumberOfWavelengthPoints	Input	number	Optional	The number of wavelength points for which the numerical integral is calculated (default: all points)
ExpMethod	Input	string	Normal	Select the method to use to calculate exponentials, normal or a fast approximation (default: Normal). Allowed values: [‘Normal’, ‘FastApprox’]
EMode	Input	string	Elastic	The energy mode (default: elastic). Allowed values: [‘Elastic’, ‘Direct’, ‘Indirect’]
EFixed	Input	number	0	The value of the initial or final energy, as appropriate, in meV. Will be taken from the instrument definition file, if available.
SampleHeight	Input	number	Mandatory	The height of the plate in cm
SampleWidth	Input	number	Mandatory	The width of the plate in cm
SampleThickness	Input	number	Mandatory	The thickness of the plate in cm
ElementSize	Input	number	1	The size of one side of an integration element cube in mm

Description

This algorithm uses a numerical integration method to calculate attenuation factors resulting from absorption and single scattering in a flat plate (slab) sample with the dimensions and material properties given. Factors are calculated for each spectrum (i.e. detector position) and wavelength point, as defined by the input workspace. The sample is divided up into cuboids having sides of as close to the size given in the ElementSize property as the sample dimensions will allow. Thus the calculation speed depends linearly on the total number of bins in the workspace and goes as \(\rm{ElementSize}^{-3}\).

Path lengths through the sample are then calculated for the centre-point of each element and a numerical integration is carried out using these path lengths over the volume elements.

Restrictions on the input workspace

The input workspace must have units of wavelength. The instrument associated with the workspace must be fully defined because detector, source & sample position are needed.

Usage

Example:

ws = CreateSampleWorkspace("Histogram",NumBanks=1,BankPixelWidth=2)
ws = ConvertUnits(ws,"Wavelength")
SetSampleMaterial(ws,ChemicalFormula="V")

wsOut = FlatPlateAbsorption(ws, SampleHeight=1, SampleWidth=0.5, SampleThickness=0.5)

print("The created workspace has one entry for each spectra: %i" % wsOut.getNumberHistograms())

Output:

The created workspace has one entry for each spectra: 4

Categories: AlgorithmIndex | CorrectionFunctions\AbsorptionCorrections

Source

C++ header: FlatPlateAbsorption.h

C++ source: FlatPlateAbsorption.cpp