\(\renewcommand\AA{\unicode{x212B}}\)

MoveInstrumentComponent v1¶

Summary ¶

Moves an instrument component to a new position.

Properties ¶

Name	Direction	Type	Default	Description
Workspace	InOut	Workspace	Mandatory	The name of the workspace for which the new instrument configuration will have an effect. Any other workspaces stored in the analysis data service will be unaffected.
ComponentName	Input	string		The name of the component to move. Component names are defined in the instrument definition files. A pathname delited by ‘/’ may be used for non-unique name.
DetectorID	Input	number	-1	The ID of the detector to move. If both the component name and the detector ID are set the latter will be used.
X	Input	number	0	The x-part of the new location vector.
Y	Input	number	0	The y-part of the new location vector.
Z	Input	number	0	The z-part of the new location vector.
RelativePosition	Input	boolean	True	The property defining how the (X,Y,Z) vector should be interpreted. If true it is a vector relative to the initial component’s position. Otherwise it is a new position in the absolute co-ordinates.

Description ¶

This moves an instrument component, e.g. a bank or a pixel.

You can specify a pathname as the name of a non-unique component (e.g. “WISH/panel03/WISHpanel03/tube005”) and one can skip parts not needed for uniqueness (e.g. “panel03/tube005”). For a unique component, you can just specify the name (e.g. “panel03”).

You can either specify an absolute position or a relative position. The relative position will be applied to the current position, so applying this twice will move the detector twice.

If you move a component that is made up of smaller parts (such as a bank is made up of detectors, or a tube is made up of pixels) then the smaller parts will be transated along with the component.

Usage ¶

Example 1: Move a component by name ¶

MoveBank.png‎ — Moving a bank through three movements. All the pixels of the bank move along with the bank component.¶

# Create a workspace with a simple instrument
ws = CreateSampleWorkspace()

# Original position of instrument component 'bank1'
print(ws.getInstrument().getComponentByName('bank1').getPos())

# Move 'bank1' by vector (1,0,0) relative to its original position
MoveInstrumentComponent( ws, 'bank1', X=1,Y=0,Z=0 )

# Check the new position of 'bank1'
print(ws.getInstrument().getComponentByName('bank1').getPos())

# Move the same bank again by vector (2,0,0)
MoveInstrumentComponent( ws, 'bank1', X=2,Y=0,Z=0 )

# Check the new position of 'bank1'
print(ws.getInstrument().getComponentByName('bank1').getPos())

# Move 'bank1' to a new absolute position (1,2,3)
MoveInstrumentComponent( ws, 'bank1', X=1,Y=2,Z=3, RelativePosition=False )

# Check the new position of 'bank1'
print(ws.getInstrument().getComponentByName('bank1').getPos())

Output ¶

[0,0,5]
[1,0,5]
[3,0,5]
[1,2,3]

Example 2: Move a detector by ID ¶

DetectorMove.png‎ — Moving an individual detector using the detector ID.¶

# Load a MUSR file
musr = Load('MUSR00015189')
# and use the first workspace in the workspace group
ws = mtd['musr_1']

# Original position of detector 33
print(ws.getInstrument().getDetector(33).getPos())

# Move detector 33 by vector (1,0,0) relative to its original position
MoveInstrumentComponent( ws, DetectorID=33, X=1,Y=0,Z=0 )

# Check the new position of detector 33
print(ws.getInstrument().getDetector(33).getPos())

Output ¶

[0.0888151,-0.108221,-0.145]
[1.08882,-0.108221,-0.145]

Categories: AlgorithmIndex | DataHandling\Instrument

Source ¶

C++ header: MoveInstrumentComponent.h

C++ source: MoveInstrumentComponent.cpp