\(\renewcommand\AA{\unicode{x212B}}\)

CreateTransmissionWorkspace v2

Enable screenshots using DOCS_SCREENSHOTS in CMake

Summary

Creates a transmission run workspace in wavelength from one or two input workspaces in TOF.

See Also

CreateTransmissionWorkspaceAuto

Properties

Name	Direction	Type	Default	Description
FirstTransmissionRun	Input	MatrixWorkspace	Mandatory	First transmission run. Corresponds to the low wavelength transmission run if a SecondTransmissionRun is also provided.
SecondTransmissionRun	Input	MatrixWorkspace		High wavelength transmission run. Optional. Causes the first transmission run to be treated as the low wavelength transmission run.
ProcessingInstructions	Input	string	Mandatory	Grouping pattern on spectrum numbers to yield only the detectors of interest. See GroupDetectors for details.
WavelengthMin	Input	number	Mandatory	Wavelength minimum in angstroms
WavelengthMax	Input	number	Mandatory	Wavelength maximum in angstroms
I0MonitorIndex	Input	number	Optional	I0 monitor workspace index
MonitorBackgroundWavelengthMin	Input	number	Optional	Wavelength minimum for monitor background subtraction in angstroms.
MonitorBackgroundWavelengthMax	Input	number	Optional	Wavelength maximum for monitor background subtraction in angstroms.
MonitorIntegrationWavelengthMin	Input	number	Optional	Wavelength minimum for integration in angstroms.
MonitorIntegrationWavelengthMax	Input	number	Optional	Wavelength maximum for integration in angstroms.
NormalizeByIntegratedMonitors	Input	boolean	True	Normalize by dividing by the integrated monitors.
Params	Input	dbl list		A comma separated list of first bin boundary, width, last bin boundary. These parameters are used for stitching together transmission runs. Values are in wavelength (angstroms). This input is only needed if a SecondTransmission run is provided.
StartOverlap	Input	number	Optional	Start wavelength for stitching transmission runs together. Only used if a second transmission run is provided.
EndOverlap	Input	number	Optional	End wavelength (angstroms) for stitching transmission runs together. Only used if a second transmission run is provided.
ScaleRHSWorkspace	Input	boolean	True	Scale the right-hand-side or left-hand-side workspace. Only used if a second transmission run is provided.
Debug	Input	boolean	False	Whether to enable the output of extra workspaces.
OutputWorkspace	Output	MatrixWorkspace		Output workspace in wavelength.
OutputWorkspaceFirstTransmission	Output	MatrixWorkspace		Output workspace in wavelength for first transmission run
OutputWorkspaceSecondTransmission	Output	MatrixWorkspace		Output workspace in wavelength for second transmission run

Description

Creates a transmission run workspace given one or two TOF workspaces. If two workspaces are provided, then the first workspace is considered a low wavelength transmission run, and the second workspace is considered a high wavelength transmission run.

Both input workspaces must have X-units of TOF. They are first converted to units of wavelength and then stitched together using Stitch1D v3, Params, StartOverlap and EndOverlap. A single output workspace is generated with X-units of wavelength in angstroms.

diagram generation was disabled

The diagram above illustrates the main steps in the algorithm. Below is a more detailed diagram describing how transmission workspaces are converted to units of wavelength and normalized by monitors. First, detectors and monitors are extracted from the input workspace using GroupDetectors v2 and CropWorkspace v1 respectively, using ProcessingInstructions in the first case and I0MonitorIndex in the second case. Then, each of the resulting workspaces is converted to wavelength (note that AlignBins is set to True for this), detectors are normalized by monitors, and the resulting workspace is cropped in wavelength according to WavelengthMin and WavelengthMax, which are both mandatory parameters. Note that the normalization by monitors is optional, and only takes place if I0MonitorIndex, MonitorBackgroundWavelengthMin and MonitorBackgroundWavelengthMax are provided. In this case, the monitor of interest will be extracted from the input workspace, converted to wavelength, and its background will be subtracted according to MonitorBackgroundWavelengthMin and MonitorBackgroundWavelengthMax. If MonitorIntegrationWavelengthMin and MonitorIntegrationWavelengthMax are provided, monitors will be integrated according to that range. If monitors are not integrated, there is an addition step in which detectors will be rebinned to monitors using RebinToWorkspace v1, to ensure that the normalization can be performed. Below is a summary of the main steps in the algorithm. For the sake of clarity, all possible steps are illustrated, even if some of them are optional.

diagram generation was disabled

Previous Versions

This is version 2 of the algorithm. For version 1, please see here.

Usage

Note

To run these usage examples please first download the usage data, and add these to your path. In Mantid this is done using Manage User Directories.

Example - Create a transmission run

trans = Load(Filename='INTER00013463.nxs')
transWS = CreateTransmissionWorkspace(FirstTransmissionRun = trans,
                                      I0MonitorIndex = 2,
                                      ProcessingInstructions = '4,5',
                                      WavelengthMin = 1,
                                      WavelengthMax = 17,
                                      MonitorBackgroundWavelengthMin = 15,
                                      MonitorBackgroundWavelengthMax = 17,
                                      MonitorIntegrationWavelengthMin = 4,
                                      MonitorIntegrationWavelengthMax = 10)

print("The first four transWS Y values are:")
for i in range (4):
    print("{:.4f}".format(transWS.readY(0)[i]))

Output:

The first four transWS Y values are:
0.0052
0.0065
0.0088
0.0123

Example - Create a transmission run from two runs

trans1 = Load(Filename='INTER00013463.nxs')
trans2 = Load(Filename='INTER00013464.nxs')
transWS = CreateTransmissionWorkspace(FirstTransmissionRun = trans1,
                                      SecondTransmissionRun = trans2,
                                      Params = [1.5,0.02,17],
                                      StartOverlap = 10.0,
                                      EndOverlap = 12.0,
                                      I0MonitorIndex = 2,
                                      ProcessingInstructions = '4,5',
                                      WavelengthMin = 1,
                                      WavelengthMax = 17,
                                      MonitorBackgroundWavelengthMin = 15,
                                      MonitorBackgroundWavelengthMax = 17,
                                      MonitorIntegrationWavelengthMin = 4,
                                      MonitorIntegrationWavelengthMax = 10)

print("The first four transWS Y values are:")
for i in range (4):
    print("{:.4f}".format(transWS.readY(0)[i]))

Output:

The first four transWS Y values are:
0.0563
0.0561
0.0570
0.0578

Categories: AlgorithmIndex | Reflectometry

Source

C++ header: CreateTransmissionWorkspace2.h

C++ source: CreateTransmissionWorkspace2.cpp