\(\renewcommand\AA{\unicode{x212B}}\)

ReflectometryReductionOne v2¶

Summary ¶

Reduces a single TOF/Lambda reflectometry run into a mod Q vs I/I0 workspace. Performs monitor normalization and transmission corrections.

Properties ¶

Name	Direction	Type	Default	Description
InputWorkspace	Input	MatrixWorkspace	Mandatory	Run to reduce.
SummationType	Input	string	SumInLambda	The type of summation to perform. Allowed values: [‘SumInLambda’, ‘SumInQ’]
ReductionType	Input	string	Normal	The type of reduction to perform when summing in Q. Allowed values: [‘Normal’, ‘DivergentBeam’, ‘NonFlatSample’]
IncludePartialBins	Input	boolean	False	If true then partial bins at the beginning and end of the output range are included
ThetaIn	Input	number	Optional	Angle in degrees
ProcessingInstructions	Input	string	Mandatory	Grouping pattern on spectrum numbers to yield only the detectors of interest. See GroupDetectors for details.
WavelengthMin	Input	number	Mandatory	Wavelength minimum in angstroms
WavelengthMax	Input	number	Mandatory	Wavelength maximum in angstroms
I0MonitorIndex	Input	number	Optional	I0 monitor workspace index
MonitorBackgroundWavelengthMin	Input	number	Optional	Wavelength minimum for monitor background subtraction in angstroms.
MonitorBackgroundWavelengthMax	Input	number	Optional	Wavelength maximum for monitor background subtraction in angstroms.
MonitorIntegrationWavelengthMin	Input	number	Optional	Wavelength minimum for integration in angstroms.
MonitorIntegrationWavelengthMax	Input	number	Optional	Wavelength maximum for integration in angstroms.
NormalizeByIntegratedMonitors	Input	boolean	True	Normalize by dividing by the integrated monitors.
SubtractBackground	Input	boolean	False	If true then perform background subtraction
BackgroundProcessingInstructions	Input	string		These processing instructions will be passed to the background subtraction algorithm
BackgroundCalculationMethod	Input	string	PerDetectorAverage	The type of background reduction to perform. Allowed values: [‘PerDetectorAverage’, ‘Polynomial’, ‘AveragePixelFit’]
DegreeOfPolynomial	Input	number	0	Degree of the fitted polynomial.
CostFunction	Input	string	Least squares	The cost function to be passed to the Fit algorithm. Allowed values: [‘Least squares’, ‘Unweighted least squares’]
FirstTransmissionRun	Input	MatrixWorkspace		First transmission run, or the low wavelength transmission run if SecondTransmissionRun is also provided.
SecondTransmissionRun	Input	MatrixWorkspace		Second, high wavelength transmission run. Optional. Causes the FirstTransmissionRun to be treated as the low wavelength transmission run.
Params	Input	dbl list		A comma separated list of first bin boundary, width, last bin boundary. These parameters are used for stitching together transmission runs. Values are in wavelength (angstroms). This input is only needed if a SecondTransmission run is provided.
StartOverlap	Input	number	Optional	Start wavelength for stitching transmission runs together. Only used if a second transmission run is provided.
EndOverlap	Input	number	Optional	End wavelength (angstroms) for stitching transmission runs together. Only used if a second transmission run is provided.
ScaleRHSWorkspace	Input	boolean	True	Scale the right-hand-side or left-hand-side workspace. Only used if a second transmission run is provided.
TransmissionProcessingInstructions	Input	string		These processing instructions will be passed to the transmission workspace algorithm
CorrectionAlgorithm	Input	string	None	The type of correction to perform. Allowed values: [‘None’, ‘PolynomialCorrection’, ‘ExponentialCorrection’]
Polynomial	Input	dbl list		Coefficients to be passed to the PolynomialCorrection algorithm.
C0	Input	number	0	C0 value to be passed to the ExponentialCorrection algorithm.
C1	Input	number	0	C1 value to be passed to the ExponentialCorrection algorithm.
Debug	Input	boolean	False	Whether to enable the output of extra workspaces.
Diagnostics	Input	boolean	False	Whether to enable the output of interim workspaces for debugging purposes.
OutputWorkspace	Output	MatrixWorkspace		Output Workspace IvsQ.
OutputWorkspaceWavelength	Output	MatrixWorkspace		Output Workspace IvsLam. Intermediate workspace.
OutputWorkspaceTransmission	Output	MatrixWorkspace		Output transmissison workspace in wavelength
OutputWorkspaceFirstTransmission	Output	MatrixWorkspace		First transmissison workspace in wavelength
OutputWorkspaceSecondTransmission	Output	MatrixWorkspace		Second transmissison workspace in wavelength

Description ¶

This algorithm is not meant to be used directly by users. Please see ReflectometryReductionOneAuto v3 which is a facade over this algorithm.

This algorithm reduces a single reflectometry run into a mod Q vs I/I0 workspace. The mandatory input properties, WavelengthMin, WavelengthMax and ProcessingInstructions, must be manually set by the user. In addition, for the algorithm to be able to convert from wavelength to momentum transfer correctly, instrument components, specially detectors, must be located at the correct positions. The expected experimental setup for the algorithm to produce correct results is shown below, where the angle between the beam direction and the sample-to-detector vector must be \(2\theta\).

../_images/ReflectometryReductionOneDetectorPositions.png

The figure below displays a high-level workflow diagram illustrating the main steps taking place in the reduction. For the sake of clarity, all possible steps are illustrated, even if some of them are optional.

../_images/ReflectometryReductionOne_HighLvl-v2_wkflw.svg

First, the algorithm checks the X units of the input workspace. If the input workspace is already in wavelength, summation and normalization by monitors and direct beam are not performed, as it is considered that the input run was already reduced using this algorithm.

If summation is to be done in wavelength, then this is done first. The the conversion to wavelength and normalisation by monitors and direct beam is done, followed by the transmission correction. Transmission correction is always done, even if the input was already in wavelength. The resulting workspace is cropped in wavelength according to WavelengthMin and WavelengthMax, which are both mandatory properties.

If summation is to be done in Q, this is done after the normalisations and cropping, but again, only if the reduction has not already been done.

Finally, the output workspace in wavelength is converted to momentum transfer (Q).

Conversion to Wavelength ¶

If summing in wavelength, detectors of interest are extracted and summed in TOF using GroupDetectors v2 with ProcessingInstructions as input. (If summing in Q, summation is not done yet as it is done in a later step after all normalisations have been done.) The workspace is then converted to wavelength with AlignBins set to True.

Next, normalization by direct beam and monitors is optionally done using Divide v1. A summary of the steps is shown in the workflow diagram below.

../_images/ReflectometryReductionOne_ConvertToWavelength-v2_wkflw.svg

Create Direct Beam Workspace ¶

Direct Beam and Monitor corrections can be applied to the workspace. These are both optional steps and will only take place if the required inputs are provided - otherwise, these steps will be skipped.

The region of direct beam is extracted from the input workspace in TOF using GroupDetectors v2 with RegionOfDirectBeam as input. This is only done if RegionOfDirectBeam is specified. The resulting workspace is converted to wavelength with AlignBins set to True.

../_images/ReflectometryReductionOne_DirectBeamCorrection-v2_wkflw.svg

Create Monitor Workspace ¶

Monitors are extracted from the input workspace in TOF using CropWorkspace v1 with I0MonitorIndex as input. The resulting workspace is converted to wavelength with AlignBins set to True. Monitor normalisation is only done if I0MonitorIndex, MonitorBackgroundWavelengthMin and MonitorBackgroundWavelengthMax are all specified.

Normalisation can be done by integrated monitors by setting NormalizeByIntegratedMonitors to true, in which case MonitorIntegrationWavelengthMin and MonitorIntegrationWavelengthMax are used as the integration range. If monitors are not integrated, detectors are rebinned to monitors using RebinToWorkspace v1 so that the normalization by monitors can take place.

../_images/ReflectometryReductionOne_MonitorCorrection-v2_wkflw.svg

Transmission Correction ¶

Transmission corrections can be optionally applied to the workspace resulting from the previous step. Transmission corrections can be either specified via transmission runs or specific correction algorithms.

When normalizing by transmission runs, i.e. when one or two transmission runs are given, the spectrum numbers in the transmission workspaces must be the same as those in the input run workspace. You can pass individual processing instructions to the transmission runs.

When normalizing by transmission run, this algorithm will run CreateTransmissionWorkspace v2 as a child algorithm, with properties WavelengthMin, WavelengthMax, I0MonitorIndex, MonitorBackgroundWavelengthMin, MonitorBackgroundWavelengthMax, MonitorIntegrationWavelengthMin, MonitorIntegrationWavelengthMax, and ProcessingInstructions. In addition, when both FirstTransmissionRun and SecondTransmissionRun are provided the stitching parameters Params, as well as StartOverlap and EndOverlap will be used by CreateTransmissionWorkspace v2 to create the transmission workspace that will be used for the normalization.

If no transmission runs are provided, then algorithmic corrections can be performed instead by setting CorrectionAlgorithm to either PolynomialCorrection or ExponentialCorrection, the two possible types of corrections at the moment. If PolynomialCorrection, is selected, PolynomialCorrection v1 algorithm will be run, with this algorithm’s Polynomial property used as its Coefficients property. If the CorrectionAlgorithm property is set to ExponentialCorrection, then the ExponentialCorrection v1 algorithm is used, with C0 and C1 taken from the C0 and C1 properties.

Sum in Q ¶

If summing in Q, the summation is done now, after all normalisations and cropping have been done. As with summation in \(\lambda\), the summation is only done if the reduction has not already been done.

The summation is done using the algorithm proposed by Cubitt et al (J. Appl. Crystallogr., 48 (6) (2015)). This involves a projection to an arbitrary reference angle, \(2\theta_R\), with a “virtual” wavelength, \(\lambda_v\). This is the wavelength the neutron would have had if it had arrived at \(2\theta_R\) with the same momentum transfer (\(Q\)).

Counts are considered to be spread evenly over the input pixel, and the top-left and bottom-right corner of the pixel are projected onto \(2\theta_R\) giving a range in \(\lambda_v\) to project onto. Counts are shared out proportionally into the output bins that overlap this range, and the projected counts from all pixels are summed into the appropriate output bins.

The resulting 1D workspace in \(\lambda_v\) at \(2\theta_R\) becomes the output workspace in wavelength.

../_images/ReflectometryReductionOne_SumInQ-v2_wkflw.svg

The IncludePartialBins property specifies how the \(\lambda_v\) range should be calculated from the input range \(\lambda_1, \lambda_2\) (which corresponds to WavelengthMin, WavelengthMax). If IncludePartialBins is false (default) then we use the projection to the strictly-cropped range \(\lambda_{c_1},\lambda_{c_2}\). This excludes any counts from the orange-shaded triangles shown in the figure, for which we may only have partial information because counts from the red shaded triangles are outside the specified lambda range.

If IncludePartialBins is true then the algorithm will use the full projected range \(\lambda_{f_1},\lambda_{f_2}\). This will include all counts from the input range \(\lambda_1,\lambda_2\), but may result in partially-filled bins for counts contributed from the orange-shaded regions if data is not available in the red-shaded regions. Note however that if the red regions do contain counts then they will still be included, e.g. if you have narrowed the range WavelengthMin, WavelengthMax from the available range for the instrument then the red regions may contain valid counts.

Conversion to Momentum Transfer (Q)¶

Finally, the output workspace in wavelength is converted to momentum transfer, \(Q=\frac{4\pi}{\lambda}sin(\theta)\). The angle \(\theta\) used depends on the method used.

When summing in wavelength, if ThetaIn is specified, this is used in the conversion to \(Q\) and the conversion is done using RefRoi v1. Otherwise, ConvertUnits v1 is used. This takes \(\theta\) from the average of the grouped detectors’ \(2\theta\) values (note that this is not the same as the \(2\theta\) of the average detector position).

When summing in \(Q\), \(\theta\) is \(\theta_R\) in the non-flat sample case or \(2\theta_R-\theta_0\) in the divergent beam case. This is because the latter needs to take into account the divergence of the beam from the assumed direct beam direction. The output workspace is set up with a single detector at the relevant \(2\theta\) so that the conversion can be done with ConvertUnits v1.

../_images/ReflectometryReductionOne_ConvertToMomentum-v2_wkflw.svg

Note that the output workspace in \(Q\) is a workspace with native binning, and no rebin step is applied to it. If you wish to obtain a rebinned workspace in \(Q\) you should consider using algorithm ReflectometryReductionOneAuto v3 instead, which is a facade over this algorithm and has two extra steps (Rebin v1 and Scale v1) to produce an additional workspace in \(Q\) with specified binning and scale factor. Please refer to ReflectometryReductionOneAuto v3 for more information.

Previous Versions ¶

This is version 2 of the algorithm. For version 1, please see here.

Usage ¶

Example - Reduce a run

run = Load(Filename='INTER00013460.nxs')
# Basic reduction with no transmission run
IvsQ, IvsLam = ReflectometryReductionOne(InputWorkspace=run,
                                         WavelengthMin=1.0,
                                         WavelengthMax=17.0,
                                         ProcessingInstructions='4',
                                         I0MonitorIndex=2,
                                         MonitorBackgroundWavelengthMin=15.0,
                                         MonitorBackgroundWavelengthMax=17.0,
                                         MonitorIntegrationWavelengthMin=4.0,
                                         MonitorIntegrationWavelengthMax=10.0)

print("{:.4f}".format(IvsLam.readY(0)[533]))
print("{:.4f}".format(IvsLam.readY(0)[534]))
print("{:.4f}".format(IvsQ.readY(0)[327]))
print("{:.4f}".format(IvsQ.readY(0)[328]))

Output:

Example - Reduce a run and normalize by transmission workspace

run = Load(Filename='INTER00013460.nxs')
trans1 = Load(Filename='INTER00013463.nxs')
trans2 = Load(Filename='INTER00013464.nxs')
# Basic reduction with two transmission runs
IvsQ, IvsLam, TRANS = ReflectometryReductionOne(InputWorkspace=run,
                                                WavelengthMin=1.0,
                                                WavelengthMax=17.0,
                                                ProcessingInstructions='4',
                                                I0MonitorIndex=2,
                                                MonitorBackgroundWavelengthMin=15.0,
                                                MonitorBackgroundWavelengthMax=17.0,
                                                MonitorIntegrationWavelengthMin=4.0,
                                                MonitorIntegrationWavelengthMax=10.0,
                                                FirstTransmissionRun=trans1,
                                                SecondTransmissionRun=trans2)

print("{:.4f}".format(IvsLam.readY(0)[480]))
print("{:.4f}".format(IvsLam.readY(0)[481]))
print("{:.4f}".format(IvsQ.readY(0)[107]))
print("{:.4f}".format(IvsQ.readY(0)[108]))

Output:

Categories: AlgorithmIndex | Reflectometry

Source ¶

C++ header: ReflectometryReductionOne2.h

C++ source: ReflectometryReductionOne2.cpp